Future Monitoring Solutions gives you knowledge
About Us
Products
Contact
Future Monitoring Solutions (FMS) remote monitoring solutions utilises the Zepiro® D2O® (Direct-To-Orbit) series of low-cost satellite telemetry devices that interface to a range of sensors, data loggers and measurement devices. They are ideally suited to use in remote or difficult to access areas and can transmit from virtually any surface location globally.
Proven to work all across Australia connecting to an extensive range of monitoring devices allowing you to check soil moisture, weather conditions, water, diesel and trough levels, rainfall, flow and pressure rates remotely.
Zepiro Nano Satellite Technology
Zepiro Features
- Integrated GPS receiver
- Low-powered operation for long term data acquisition
- Internal non-rechargeable 10Ah (serviceable)
- Single protected M12 8-pin Interface connector to sensors
- Separate USB interface to allow for “as installed” configuration, commissioning, and validation
- Self-contained in rugged housing to suit harsh environments – IP67
- External 12V power supply (SDI 12 and VCP models)
- Tamper protection (RG and FLOW models)
Satellite Transmission Window
Site Installation
PRODUCTS
Voltage, Current or Pulse Signal
The Zepiro® D2O® (Direct-To-Orbit) VCP is a satellite telemetry solution that takes periodic measurements from devices that can provide an appropriate voltage, current or pulse signal. It is ideally suited to use in remote or difficult to access areas and can transmit from virtually any surface location globally. It is a low-power device designed for endurance, maintenance-free monitoring applications with the included battery capable of providing power for up to four years. Once setup, the D2O VCP efficiently packages the data messages from the connected device(s), and sends them via a low-earth orbit satellite network back to a terrestrial ground station. From there Zepiro’s servers securely recompile the data packets to readable formats and forwards the data to the end user for analysis.
Remote Flow Meter Telemetry
The Zepiro® D2O® (Direct-To-Orbit) FL1 is a satellite telemetry solution for digital, pulse type, flow meters. It is ideally suited to use in remote or difficult to access areas and can transmit from virtually any surface location globally within satellite service areas. It is a low-powered device designed for endurance, maintenance-free monitoring applications with the included battery capable of providing power for up to three years. The D2O FL1 records hourly flow totals and data messages are created and queued for satellite transmission periodically throughout the day, each containing up to 7 hourly measurements. Messages are sent via a low-earth orbit satellite network back to a terrestrial ground station. From there Zepiro’s servers securely recompile the data packets to readable formats and forwards the data to the end user for analysis.
Remote Rain Gauge
The Zepiro® D2O® (Direct-To-Orbit) RG1 is a satellite telemetry solution for digital, pulse type, tipping bucket rain gauges. It is ideally suited to use in remote or difficult to access areas and can transmit from virtually any surface location globally within satellite service areas. It is a low-powered device designed for endurance, maintenance-free monitoring applications with the included battery capable of providing power for up to three years. The D2O RG1 records hourly rainfall totals and data messages are created and queued for satellite transmission periodically throughout the day, each containing up to 7 hourly measurements. Messages are sent via a low-earth orbit satellite network back to a terrestrial ground station. From there Zepiro’s servers securely recompile the data packets to readable formats and forwards the data to the end user for analysis.
Remote SDI-12 protocol Telemetry
The Zepiro® D2O® (Direct-To-Orbit) SDI is a satellite telemetry solution for devices that can interface via the SDI-12 protocol. It is ideally suited to use in remote or difficult to access areas and can transmit from virtually any surface location globally. It is a low-powered device designed for endurance, maintenance-free monitoring applications with the included battery capable of providing power for up to four years (settings dependent). Once setup, the D2O SDI efficiently packages the data messages of SDI-12 readings from the connected device, and sends them via a low-earth orbit satellite network back to a terrestrial ground station. From there Zepiro’s servers securely recompile the data packets to readable formats and forwards the data to the end user for analysis.
The FMS local – Follow us on
Contact us
Fill in the form below, give us a call or send us an email.
Looking for support?
We're here to help! Get in touch if you have any technical or account questions.