Voltek Pty Ltd
Visual inspection:
This is where the electrician will survey the electrical installation before he/she commences with the electrical testing. The visual inspection will highlight broken or cracked devices, where devices may have been installed in the wrong location, or if there have been overloading or over heating problems.
High Voltage Test
This test is carried out by applying a significantly higher than operating voltage to the device under test. In this test, the insulation of a product, stressed to a greater extent than under normal operating conditions, should not be breached for the product to pass.
Leakage Current Test
This test is to measure the undesirable leakage current that flows through or across the surface of the insulation or the dielectric of a capacitor. This test is generally carried out at 100%-110% of the rated input voltage of the product under test. The maximum acceptable limit of a leakage current is generally 210 micro amperes. At first, this test was mandatory for medical devices only.
About us
We have been servicing the Bayside Areas for the past 20 plus years, please contact us to discuss your situation, we are only to happy to help.
Information
Please contact us if you have any questions or would like more information about the services we provide.
Reach Us
Feel free to either call or email, we will get back to ASAP
Unit 5/ 45 Tova Dr,
Carrum Downs VIC 3201
0408 593 934
mal@voltek.com.au