Red RC

May 3, 2024

Leadfinger B6 | B7 Retro-mod body

Leadfinger Racing has unveil a new “Retro-Mod” body and wing for Team Associated’s B6 and B7 2WD buggies. In the beginning, the “Retro-Mod” design that started as a side project to create something a little different, surprised everyone by turning into one of the coolest mods in Leadfinger Racing history. If you’re an old school racer you may notice something familiar. In LFR’s opinion, the 1987 Optima Mid body is one of the best-looking 4WD 1:10 scale buggy bodies even today. So, what would happen if we combined a similar body style with the both the Team Associated B6 and B7, well this is it. This body is perfect for the modern-day racer going after that vintage look on their Associated 2WD buggy. Made in the USA from durable polycarbonate, the new “Retro-Mod” body comes clear and ready for paint. Protective over spray film, window masks and official LFR logo stickers are included. The wing is sold separately.

View side profile here

May 3, 2024

Bittydesign P-GT3R 1:12 GT bodyshell

Following on from the release of its Porsche GT3R styled 1:10 GT bodyshell last week, Bittydesign has now released a smaller 1:12 version intended for use on SupaStox and SupaStox GT plus any other 1:12 scale model in the GT12 category. Meeting BRCA body specs, the P-GT3R 1:12 GT is made with high quality and genuine polycarbonate Lexan and fits all GT12 chassis on the market with 200mm wheelbase and 160mm width rear axle. The body includes a complete set of screw, nuts and large plastic washers to fix properly the rear wing. Sold clear with protective film outside, included in the package is a decal sheet pre-cut and window masks.

View more images here

May 3, 2024

Xray X8 1:8 4WD Pan Car

Xray has announced something new to the market with the release of the brand new X8, an electric powered 4WD pan car with a solid rear axle and front one-way axle. This project is realised on the basis of many years of experience within the 1:8 onroad category and was designed by company founder Juraj Hudy, who himself started out RC racing in the sport’s oldest category. The X8 is designed with the mindset of ease-of-use and simplified setup, but most importantly being easy to drive. All of these requirements were fulfilled thanks to its concept, where all chassis components work in perfect symphony on the chassis. The pan car features a unique sandwich chassis design with a battery tray that is integrated from the top for longitudinal reinforcement of the lower chassis plate. The battery tray and lower chassis work together in a uniform flex system. The unique battery tray system of the X8 works together with the lower chassis plate in a uniform flex system and this allows the car to be adjusted for different flex characteristics for different track conditions. By adding or removing the screws on the front chassis brace the flex can be adjusted from very soft up to very stiff.

View the full X8 presentation here

May 3, 2024

Rêve D RDX Carbon Chassis & Top Deck Set

Japanese competition drift car manufacturer Rêve D has announced the release of a Carbon Chassis & Top Deck Set for its RDX 1:10 chassis. This optional product set is designed to optimise the performance of the RDX kit with their development team meticulously testing multiple prototypes and conducting numerous field tests to create this set and push the RDX kit’s performance to extreme levels. Scheduled for shipping in late May alongside the previously announced FRP chassis set, this new carbon main chassis & upper deck set are produced from 2.5mm thick twill carbon. Careful attention has been paid to details such as shape, thickness, and lightening to enhance pitching and roll rigidity, taking the RDX’s driving performance to new heights. The set includes two types of connections between the upper deck and battery holder: an aluminium link plate for the genuine plastic resin top deck, and a carbon top deck for increased battery holder rigidity. These options allow instant adjustment of traction balance. Furthermore, the set offers four servo mounting positions, enabling you to customise your setup to suit your course layout and driving style.

View more images here

May 3, 2024

Schelle B7 Aluminum Caster Block Mounts

Kurt Wenger’s Texas based Schelle Racing Innovations has released two new options of Caster Block Mounts for the Team Associated B7|B7D buggy 1:10 2WD Buggy. CNC machined from aircraft aluminium and finished with black anodised and laser etching of the Schelle logo and size, they are a practical and durable upgrade for racers. Available in 0 and -2 options, the 1-piece design with M3 threaded and a tapped mounting hole for the upper link makes tuning simple, with the added durability of billet aluminium. The design has a chamfered upper edge for upper link clearance. Blue thread lock is recommended on the ballstud location.

Source: Schelle Racing Innovations [schelleracing.com]

May 2, 2024

AGFRC 1:6 Scale Ultra Torque 72KG Brushless Giant Servo

New from servo manufacturer AGFRC is their upgrade design A200BHMW IP67 waterproof Ultra Torque 72Kg digital giant servo intended for 1:6 car use. Compatible with 2S normal driving voltage is equipped with a reliable 15T output shaft and all-aluminium CNC servo case. Powered by a high quality brushless motor it can deliver 0.092Sec fast speed and 72kg-cm impressive torque at 8.4V. The steel material gears keep the servo working smooth and reducing any deformity or wear. Programmable features offer more personalised parameter settings, such as soft start, over load protection, and other basic settings. It is a large size servo suitable for 1:6 vehicles and at 180g lighter is also an option for 1:5 using a matched mounting tray. For easy installation, a 15T spline metal double horn and a single horn are included.

View features & more images here

May 2, 2024

Kyosho Pure Ten GP 4WD V-ONE R4 Evo.3

Kyosho has unveiled the upcoming release of a new kit version of its V-ONE R4 1:10 Competition Nitro Touring Car, the Pure Ten GP 4WD V-ONE R4 Evo.3. The latest evolution of the R4, which was first released in 2011, the Evo.3 now comes with a chassis conversion kit released in 2023 as standard along with a revised shape front bulkhead and new stabilizer bar set-up in response to the latest racing developmenrs. In the new main chassis, the engine mounting method has been revised to a fixed-centre type, optimising chassis flexibility and eliminating the quirks in left and right steering characteristics during cornering. At the same time, the receiver and servo battery mounting tray has been updated, which also improves the roll characteristics of the chassis. Battery replacement is also easier. What’s more interesting is that the V-ONE R4 Evo.3 kit will be sold in a package that can accommodate both foam and rubber tyres. The clutch is a type that fits the OS-12TG engine, which is often used in Japan, and comes with clutch springs suitable for Kyosho Cup designated rubber tyres and open race foam tyres. Front side pulleys and damper springs for both rubber and foam tires are included.

View more images here

May 1, 2024

The Michal Orlowski Column – Edition No.2

You all loved his first column so we are delighted that Michal Orlowski has somehow found time in his busy schedule to give us another great column as an insight into his world as Schumacher’s star factory driver. Once again we’ll let Michal take it away and tell you in his own style what has been going on over the last two months….. ‘It has been a while since my last update here. We have been hard at work with the team to finish off the winter season on a high. We attended numerous events between February and April, which I will tell you all about, emphasising the struggles and how we could overcome them together. After attending the Mibosport Cup in early February, it was time to switch back to buggy mode. For the last few years, the MK GP event has been one of the mostly anticipated off-road races of the winter season with hundreds of drivers participating, but more importantly thousands of people coming to watch us race RC cars. The event is held in the MK shopping centre in Milton Keynes, UK, home to the Redbull F1 team. The event is organised by the Silverstone Club, who hosts weekly club races and a winter series at a smaller venue. This gave us the chance to test on the unique carpet the MK GP crew decided to use since 2023.

Continue reading here