Download Article Download Article

When first learning to drive, you were most likely taught to adjust a car’s mirrors before driving it for the first time. You were then likely warned about the blind spots on each side, which you should always check before changing lanes or turning. However, it is possible to adjust a car’s mirrors in a way that eliminates these blind spots, meaning that only a quick glance becomes necessary before changing lanes. You’ll need to start by adjusting the side and center rear view mirrors, then confirm they overlap properly.

Part 1
Part 1 of 2:

Adjusting the Side Mirrors

Download Article
  1. You should be leaning so that your head almost touches the driver's window. If your mirror is adjusted in the traditional fashion, the side of your car should almost take up the whole mirror. Correct this by adjusting the mirror until you can just see the rear quarterpanel (the rear end of the car).[1] If you’ve adjusted the mirror correctly, the rear of your car should occupy less than a third of the mirror.
  2. Your head should be as close to the center as you can without having to leave your seat. From there, position the right side mirror so you can just see the rear quarterpanel of the passenger side in the mirror.[2] Again, ensure the quarterpanel takes up less than a third of the mirror’s view.
    Advertisement
  3. Place this mirror to see as much of your rear window as you can. You want to see directly out of the rear of your vehicle; don’t try tilting the mirror to get a better view of traffic on either side.[3] The center mirror should compensate for what the side mirrors can’t see, not compensate for badly adjusted side mirrors.
  4. Advertisement
Part 2
Part 2 of 2:

Confirming the Elimination of the Blind Spots

Download Article
  1. You shouldn’t be able to see your car at all in either side mirror, giving you a much wider view.[4] If you can still see the side of your car in either mirror, try the above steps again. You’ll likely need to adjust the mirrors so they point further outward.
  2. Your mirrors should now cover more of the lanes right next to your car. Not only can you keep track of cars behind you and to the side, but you can follow them visually as they approach, going a long way to eliminating your car’s blind spots.[5] While you’ll still want to perform a quick shoulder check for added safety when changing lanes, you’ll now have a better view of vehicles and objects to the sides.
  3. Pay particular attention to cars passing you. As they approach, you should first see them in the center rear view mirror. Then, as they pass you, they’ll move laterally through your center rear view mirror until they appear in the corresponding side mirror. This transition should be smooth; the vehicle should be reflected by your side mirror as soon as it leaves the center mirror. This confirms the elimination of your car’s blind spots.
    • If there is a pause between the vehicle leaving the center mirror and appearing on your side mirror, you’ll need to re-adjust your mirrors as there’s still a blind spot left.
  4. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    How do I get rid of all my blind spots?
    Simon Miyerov
    Simon Miyerov
    Driving Instructor
    Simon Miyerov is the President and Driving Instructor for Drive Rite Academy, a driving academy based out of New York City. Simon has over 8 years of driving instruction experience. His mission is to ensure the safety of everyday drivers and continue to make New York a safer and efficient driving environment.
    Simon Miyerov
    Driving Instructor
    Expert Answer
    Every vehicle has blind spots, and different types of vehicles have different types of blind spots. You may be able to adjust your mirrors in a way where you minimize the size of your blind spots, but you aren't going to be able to get rid of them completely.
  • Question
    What if the view isn't the same in both side mirrors?
    Community Answer
    Community Answer
    This usually means one of the mirrors was not adjusted properly. When seated in a normal driving position, you shouldn't see your car at all in their side mirror. If only one side mirror shows your car, lean towards that side mirror and correct its alignment until you barely see the side of your car.
  • Question
    Is there any small mirror I can buy for my blind spot?
    Community Answer
    Community Answer
    Blindspot mirrors can be purchased online or perhaps motor factors/car shops. Between about £2 and £10.
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement

Video

Tips

  • Check your mirrors often, not only when changing lanes. Pairing this mirror setting method with frequent scanning will allow you to be more aware of vehicles and objects around you.
  • Note that adjusting your mirrors this way means you have to turn your head to parallel park, as you can’t see your car in your side mirrors.
  • It will take some time to adjust to driving with your mirrors arranged in this way. Give it about a week until you become comfortable.
Show More Tips
Submit a Tip
All tip submissions are carefully reviewed before being published
Thanks for submitting a tip for review!
Advertisement

Warnings

  • Don't adjust mirrors while driving.
  • Always look over your shoulders before changing lanes! While this mirror method eliminates blind spots for most vehicles, it is possible that motorcycles, bicycles and pedestrians won’t be as visible.
Advertisement

About This Article

Simon Miyerov
Co-authored by:
Driving Instructor
This article was co-authored by Simon Miyerov. Simon Miyerov is the President and Driving Instructor for Drive Rite Academy, a driving academy based out of New York City. Simon has over 8 years of driving instruction experience. His mission is to ensure the safety of everyday drivers and continue to make New York a safer and efficient driving environment. This article has been viewed 702,922 times.
25 votes - 88%
Co-authors: 26
Updated: August 10, 2021
Views: 702,922
Categories: Learning to Drive
Article SummaryX

To set your rear-view mirrors in order to eliminate blind spots, start by leaning your head to the left so that your head is almost touching the window. Then, adjust the driver’s side window so that you can see just the rear end of the car in the mirror. Next, lean to your right and adjust the passenger-side mirror so that you can see just the rear end of the car on that side, as well. Finally, return to your usual position and move the center mirror so that you can see directly out your rear window, and avoid tilting the mirror to get a better view of the traffic on either side. To learn more, like how to check the adjustment of your side mirrors from a normal, seated position, read on!

Did this summary help you?

Thanks to all authors for creating a page that has been read 702,922 times.

Reader Success Stories

  • Duke Smith

    Duke Smith

    Jun 3, 2020

    "This confirmed what I saw on YouTube about adjusting mirrors in this manner. I have been driving for nearly 20..." more
Share your story

Did this article help you?

Advertisement