Firescope Fire Services installs the complete range of Passive Fire Protection and Fire Stopping Systems to cover all your spread of flame prevention and structural fire protection.
All fire penetrations inclusive of electrical cabling and ducting, PVC pipes, steel and copper pipes, busbars as well as fibre optic. We inspect, install and certify all your requirements for all your penetration needs whether they penetrate through masonry walls, floor slabs or plasterboard fire walls. We supply all types of fire collars and wraps to multiple PVC and Polyethylene pipe systems.
We offer supply and install of a vast range of fire and standard door systems. This includes glass door systems and fire sliding doors. We can supply a backfill of fire frames to comply with the required standards and also supply and install fire door hardware. We can tag and certify all our works as well as carry out door inspections and reports.
With our AMCA certificate of competency in fire damper installation and inspection we are fully qualified to cover all your requirements. Whether it be intumescent or mechanical fire dampers you need, rest assured we will have it covered.
For fire protection of your structural steel we cover all aspects of steel and fire application. If you choose to go for the standard application of fire sprays, Cafco 300, Fendolite or Mandolite we have qualified spray teams ready to do the job for you. Should you choose to go with the now becoming more popular and more aesthetic option of the fire retardant paint, we specialise in the Nullifire paints. Again, a fully qualified and certified team able to cover all you fire requirements. We also cover all your cable coating requirements.
Please take a look at our latest SC900 series paint where you only require a one coat application to raw steel so no more primers required. It is also a fully weatherproof paint for internal and external application and can be applied on and off site. Curing time of two hours and transport ready in eight hours.
This is the new fire board in the ever growing market of which Firescope are now licenced and recognised installers. This product allows for a thinner application system thus allowing for a more cost viable option to the opposing board systems. The board can be applied for walls, ceilings and structural steel fire protection systems and is suitable for internal as well as external applications.
For fire protection of your air conditioning ducting we offer the fire spray solutions as well as fire board protection through 1-4 sided encasements. Fire protection can be given up to 4hrs depending on application.
Fire wall barriers as well as fire separation and compartmenting we cover all your needs through multiple fire board options. This is inclusive of structural steel protection and for separation of services in fire stairs.
We specialise in the application of ceiling or roof voids where the fire wall between units does not continue to the roof top. We install the Firefly products which is a fire rated curtain which is hung from the ceiling joists to the top of the fire wall. Depending on the size of the openings we also supply and install the Intubatt for these applications or for barrier and penetration systems.
For the heavier duty fire and explosion protection normally required on the industrial sites we are fully qualified to install the Durasteel wall and door systems. Durasteel is a composite panel of fibre reinforced cement mechanically bonded to punched steel sheets on both outer surfaces and can supply fire protection up to 4hrs.
We offer multiple window protection systems from security, bullet proof, hurricane and fire protection to name a few. We also deal with standard window systems for shop fronts etc where your requirement is purely for a steel frame system. We also have fire rated timber frame systems to offer. This is a large part of our market and have many years experience with multiple projects across Perth and as far as Port Hedland.
Firescope not only deals in fire windows, we also supply and install ballistic windows tested and certified to Australian Standards G2 rating, incorporating TPS U-Series (unico) thermally broken steel framing system with 28mm (nominal) G2 rated bullet resistant glass. This frame is available in both standard and slimline varieties, providing architectural designed detail with certified protection. The integrated thermal break allows for these windows to be installed in an external application while providing a high level of energy performance for both heat reduction and loss where required.
We are also in the Fire retardant market where we apply fire retardant products to fabrics and timbers. This covers a broad spectrum of applications from heritage buildings, night clubs, cinemas, schools and theatres to name a few. Drop us a line so we can assist you with all your requirements and questions. All retardant applications are certified to the required Australian Standards with certified AS labels.
FIRESHELL (F1E) is an exterior rated, flexible 1-part, self-priming intumescent fire resistant paint for use on a variety of timbers. F1E meets the requirements for bushfire-resisting timber specified in AS3959:2009 Construction of Buildings as well as BAL in bushfire-prone environments. It can be applied by means of spray gun or roller and brush application. The paint comes in two colours being grey or brown and is very easy to apply. Please contact us for any queries or quotes.
Covering all your fire sealing from controls joints in walls and slabs to penetration seals. We use the acrylic mastic seals and for an external higher fire rating protection up to 4hrs we offer the Bostik polyurethane sealants.
We'll get back to you shortly.