Australian Multi Media Pty Ltd

With so many cheap mobile phone plans available from the cellular carriers, you can connect your telephone system to the GSM network and take advantage of these cheaper rates to call mobile phones. The GSM gateway simulates a PSTN phone line to your telephone system.

In fact, some new plans allow calls up to 10 minutes Free Mobile to Mobile. So by connecting your telephone system, you can avoid landline to mobile phone call costs.

It's easy and it save money !!

Very fast ROI !

Download a Brochure

System Operation

• Connection to Analogue Trunk - The system installs onto an analogue trunk line of the telephone system. When the line is selected, the unit provide a dial tone. The phone number dialed is then out put to the GSM network and the call is established

Incoming and Outgoing Call features

• Toll restrictions - Define which cellular operator prefixes to allow and which ones to restrict
• Call Duration - Limit the length of calls to protect you from connections that are accidentally left open

System Management & Monitoring

• DTMF Programming and Control - Configure the system parameters directly from DTMF telephone connected directly to the unit or Via the Telephone system.

Configurable Controls & Maintenance

• CLIP / CLIR - Display or hide the SIM card number using Calling Line Identification/Restriction setting
• SIM PIN Control - Protect the SIM within the CGW-T/TS from unauthorized use if removed
• Roaming - Allow calls to automatically connect to the first available signal or restrick them to specific network operator
• Gain Control - Adjust high quality volume levels for both incoming and outgoing calls
• Reverse Polarity Support - for "B" party hang up if supported by the telephone system.

In many cases, telephone systems are not supplied with analogue trunks. The answer is to install a GSM gateway that provides a Basic Rate ISDN line. This unit takes 2 mobile phone sim cards and provides 2 line capacity.

Download a Brochure

Here are some great features.

• Intelligent Routing - Return up to 1500 mobile calls directly to the calling Direct Dial-In CGW-I stores the link between the dialing extension number and the dialed cellular number. When a missed mobile call is returned, CGW-I recognizes the Caller ID and routes the caller to the dialers extension.
• MSN Routing - Route incoming cellular calls to default Multi Subscriber Number (MSN), such as a specific extension, Automated Attendant or Voice Mail system.
• Call Barring - Dedicate your SIM to handle only incoming calls, outgoing calls or both.
• Call Diversion - Automatically reroute incoming calls to an alternate channel when SIM is busy.
• Toll Restrictions - Define which cellular operator prefixes to allow the CGW-I to call and which ones not to allow.
• Redirect Calls - Override Toll Restrictions and set up a cross network connection
• Call Duration - Limit the length of calls to protect you from connections that are accidentally left open.
• Windows Based Utility Program Supplied
• Warning alarms sent by SMS amd Email
• Statistics
• Call Detail Loging up to 2500 calls
• CLIP - Display or hide SIM card numbers using Calling Line Identification.
• SIM Card Protection - Protect each SIM card from unauthorized use if removed
• Network Lock - Configure your CGW - I to work permanently with one carrier.
• Roaming - Allow calls to automatically connect to the strongest available signal or restrict them to a specific operator.
• Dialling Mode Support - Overlap or En Block.
• End Of Dialling Signal - Reduse the time required to connect to a dialled number.
• Gain Control - Adjust volume levels for both incoming and outgoing calls on each channel.

.